(file) Return to dcs2_convert_to_0_or_1.txt CVS log (file) (dir) Up to [Development] / JSOC / doc

File: [Development] / JSOC / doc / dcs2_convert_to_0_or_1.txt (download)
Revision: 1.2, Fri Dec 19 16:35:45 2008 UTC (13 years, 11 months ago) by kehcheng
Branch: MAIN
CVS Tags: Ver_LATEST, Ver_DRMSLATEST, Ver_9-5, Ver_9-41, Ver_9-4, Ver_9-3, Ver_9-2, Ver_9-1, Ver_9-0, Ver_8-8, Ver_8-7, Ver_8-6, Ver_8-5, Ver_8-4, Ver_8-3, Ver_8-2, Ver_8-12, Ver_8-11, Ver_8-10, Ver_8-1, Ver_8-0, Ver_7-1, Ver_7-0, Ver_6-4, Ver_6-3, Ver_6-2, Ver_6-1, Ver_6-0, Ver_5-9, Ver_5-8, Ver_5-7, Ver_5-6, Ver_5-5, Ver_5-3, Ver_5-2, Ver_5-14, Ver_5-13, Ver_5-12, Ver_5-11, Ver_5-10, Ver_5-1, Ver_5-0, NetDRMS_Ver_LATEST, NetDRMS_Ver_9-9, NetDRMS_Ver_9-5, NetDRMS_Ver_9-41, NetDRMS_Ver_9-4, NetDRMS_Ver_9-3, NetDRMS_Ver_9-2, NetDRMS_Ver_9-1, NetDRMS_Ver_9-0, NetDRMS_Ver_8-8, NetDRMS_Ver_8-7, NetDRMS_Ver_8-6, NetDRMS_Ver_8-5, NetDRMS_Ver_8-4, NetDRMS_Ver_8-3, NetDRMS_Ver_8-2, NetDRMS_Ver_8-12, NetDRMS_Ver_8-11, NetDRMS_Ver_8-10, NetDRMS_Ver_8-1, NetDRMS_Ver_8-0, NetDRMS_Ver_7-1, NetDRMS_Ver_7-0, NetDRMS_Ver_6-4, NetDRMS_Ver_6-3, NetDRMS_Ver_6-2, NetDRMS_Ver_6-1, NetDRMS_Ver_6-0, NetDRMS_Ver_2-7, NetDRMS_Ver_2-5, NetDRMS_Ver_2-4, NetDRMS_Ver_2-3, NetDRMS_Ver_2-2, NetDRMS_Ver_2-1, NetDRMS_Ver_2-0b1, NetDRMS_Ver_2-0b, NetDRMS_Ver_2-0a2, NetDRMS_Ver_2-0a1, NetDRMS_Ver_2-0a, NetDRMS_Ver_2-0, HEAD
Changes since 1.1: +21 -11 lines
dcs2 (the spare) is online all the time now

		/home/production/cvs/JSOC/doc/dcs2_convert_to_0_or_1.txt


        -----------------------------
        Convert dcs2 to dcs0 or dcs1
        -----------------------------

Here are the steps to enable network connection to DDS from the
dcs spare (dcs2).

1. If the system to be replaced is still alive, login and
   run "ifdown eth3" as root.

2. Log in the spare (dcs2) as root and run the command
   "ifdown eth3".

3. Open the front door of the NASA rack and examine the
   three red ethernet cables.  Normally the dcs0 cable
   should be on port 12 of switch x20b, the dcs1 cable
   should be on port 3 of switch x20a, and the dcs2
   cable should be on port 4 of switch x20a.  To fail-
   over HMI, unplug the dcs1 cable and move the dcs2
   cable into port 3, switch x20a.  To fail-over AIA,
   unplug the dcs0 cable and move the dcs2 cable to
   port 12, switch x20b.

4. Run "/etc/sysconfig/network/XXX-up", where XXX is
   either HMI or AIA, on dcs2.
 

To restore the original dcs2 to itself, run "ifdown eth3",
move its red ethernet cable back to port 4, switch x20a,
and run /etc/sysconfig/network/MYSELF-up. 

To put the origina HMI or AIA machine back online, and plug 
its red ethernet cable back in its original port (port 3,
switch x20a for HMI; port 12, switch x20b for AIA).  If
the machine has not been rebooted since it went offline,
run "ifup eth3".

Karen Tian
Powered by
ViewCVS 0.9.4