1 production 1.1 /home/production/cvs/JSOC/doc/xtape_svc.on_xim_for_simulation
3 Login on xim as production.
5 The xtape_svc will read the file /tmp/t950_status_dump.out to get
6 its tape inventory. So set up this file as you want before you start.
8 > cd /home/production/cvs/JSOC/base/sums/scripts
9 > sum_stop_xim.MULTI
10 > sum_start_xim.MULTI
12 Also run on xim as production:
13 > cd /home/production/cvs/JSOC/base/sums/scripts
14 > tximview -i jim
15 (connect to db jim, which is what xtape_svc is running with.)
17 If the Imp/Exp button on the top of the gui lights up, then you
18 need to place a tape in the robot like so:
19 Hit Imp/Exp
20 A window comes up advising that 'We will unload n tapes(s)".
21 Hit the 'Start Expired Tape Unload'
22 production 1.1 You will see the tape unload into the import/export slots and
23 a new window will appear labeled 'Import/Export Ops'.
24 It will tell you what tapes it needs.
25 Edit the file:
27 (there's a copy save in /home/production/cvs/JSOC/base/sums/scripts)
28 to include the new tapes to be put into the unit.
29 Make sure you change any 'Empty:' to 'Full :'
30 and make sure there are spaces after the tapeid at the end of the line.
31 This will simulate the reinventory that the t950 takes after you hit
32 the red button on the 'Import/Export Ops' window:
33 Exp/Exch Done
35 Wait while the new inventory is simulated and you should then see the
36 new tape start to read.
39 On xim you can see the lastest xtape_svc and xsum_svc log files with:
40 > logsum
41 > logtape
42 > logsumt (tail -f)
43 production 1.1 > logtapet (tail -f)
45 If you need to remake xtape_svc do on n02 as production:
46 (it's always best to do this with setenv JSOC_DEBUG 1)
47 > cd /home/production/cvs/JSOC
48 > make xtape_svc