JSOC/proj/lev0/apps |
![]() |
ViewCVS and CVS Help |
Current directory: | [Development] / JSOC / proj / lev0 / apps |
Current tag: | Ver_8-3 |
Files shown: | 79 |
File | Rev. | Age | Author | Last log entry |
---|---|---|---|---|
![]() |
||||
![]() |
13 years | production | in_air_cal3.p/1.4 additions by Jesper |
|
![]() |
1.50 | 9 years | prodtest | add ingest_lev0_irisdc_jim |
![]() |
1.4 | 13 years | carl | Updated file because had a path to JSOC version map files to carl's workspace. R... |
![]() |
1.13 | 11 years | jsoc | Haos changes. |
![]() |
1.2 | 12 years | carl | fix for move of dayfile directory from tmp21 to tmp22 |
![]() |
1.4 | 9 years | prodtest | change HK_DF_HSB_DIRECTORY |
![]() |
1.1 | 12 years | carl | Added to use when testing ingest_lev0. This directed saving of HK ISP,SEQ packet... |
![]() |
1.1 | 12 years | carl | Added to use when testing ingest_lev0. This directed saving of HK ISP,SEQ packet... |
![]() |
1.8 | 14 years | phil | fixed too big malloc CV: -------------------------------------------------------... |
![]() |
1.3 | 12 years | jps | Improved handling of negative pixel values. |
![]() |
1.2 | 15 years | arta | Fix hard-coded paths to use JSOC/base and JSOC/proj, not JSOC/src/base and JSOC/... |
![]() |
1.30 | 11 years | arta | Pass the path to the JSOC tree to the interpolation code - instead of using a ha... |
![]() |
1.9 | 11 years | arta | Pass the path to the JSOC tree to the interpolation code - instead of using a ha... |
![]() |
1.6 | 11 years | arta | Pass the path to the JSOC tree to the interpolation code - instead of using a ha... |
![]() |
1.11 | 10 years | prodtest | change # or args in limb_fit() call |
![]() |
1.1 | 11 years | production | initial |
![]() |
1.2 | 12 years | production | *** empty log message *** |
![]() |
1.3 | 11 years | arta | Pass the path to the JSOC tree to the interpolation code - instead of using a ha... |
![]() |
1.15 | 9 years | prodtest | *** empty log message *** |
![]() |
1.1 | 10 years | production | *** empty log message *** |
![]() |
1.10 | 9 years | prodtest | add timeline_roll code |
![]() |
1.2 | 9 years | prodtest | *** empty log message *** |
![]() |
1.27 | 9 years | prodtest | *** empty log message *** |
![]() |
1.2 | 12 years | production | *** empty log message *** |
![]() |
1.1 | 15 years | arta | Move JSOC/src/base to JSOC/base and JSOC/src/proj to JSOC/proj. 86 JSOC/src. |
![]() |
1.7 | 12 years | production | Richard's change |
![]() |
1.5 | 12 years | production | Richard's change |
![]() |
1.24 | 12 years | carl | #332 - Remove assert() |
![]() |
1.16 | 10 years | arta | fix bad checking |
![]() |
1.3 | 14 years | carl | decode_hk.h: Added 2 define parameters for merge data series updates. |
![]() |
1.12 | 10 years | prodtest | added IRIS coe |
![]() |
1.9 | 10 years | prodtest | add IRIS |
![]() |
1.23 | 9 years | production | change HIMGCFGFILE |
![]() |
1.3 | 9 years | prodtest | *** empty log message *** |
![]() |
1.3 | 11 years | kehcheng | Fix silly mistake. |
![]() |
1.7 | 10 years | prodtest | put in OLD message |
![]() |
1.1 | 15 years | arta | Move JSOC/src/base to JSOC/base and JSOC/src/proj to JSOC/proj. 86 JSOC/src. |
![]() |
1.24 | 10 years | arta | Add a call to drms_count_records(). This module uses drms_open_recordset(), whic... |
![]() |
1.2 | 13 years | arta | Make warning #266 an error if the compiler is icc - not declaring a function can... |
![]() |
1.7 | 12 years | carl | Fix for TRAC Ticket #335. There was an accidental check in of incorrect master p... |
![]() |
1.8 | 12 years | production | change p[i].sat_rot to minus sign |
![]() |
1.20 | 9 years | arta | Fix a bug in the handling of missing time values in the code that obtains SAA an... |
![]() |
1.1 | 12 years | production | initial |
![]() |
1.9 | 14 years | thailand | Added check for config_rs to fail properly for missing config records |
![]() |
1.20 | 12 years | production | *** empty log message *** |
![]() |
1.16 | 12 years | kehcheng | cast pixel value to double before accumulating partial sums |
![]() |
1.11 | 11 years | kehcheng | Fix image corruption due to bad skip value in crop table between Dec 2011 and Ja... |
![]() |
1.1 | 10 years | prodtest | change TBL_DIR to /home/prodtest from /home/production. Need this on new dcs1x d... |
![]() |
1.1 | 10 years | jim | initial |
![]() |
1.1 | 10 years | jim | initial |
![]() |
1.1 | 15 years | arta | Move JSOC/src/base to JSOC/base and JSOC/src/proj to JSOC/proj. 86 JSOC/src. |
![]() |
1.85 | 9 years | prodtest | add check for stopfile in while(readdir) |
![]() |
1.4 | 9 years | prodtest | *** empty log message *** |
![]() |
1.5 | 10 years | prodtest | *** empty log message *** |
![]() |
1.24 | 9 years | prodtest | add ispfoundreopen |
![]() |
1.3 | 9 years | prodtest | *** empty log message *** |
![]() |
1.4 | 9 years | prodtest | see mail Incorrect CRVALi in prelim04 - bugfix for iris_isp2solar.pro Jean-Pier... |
![]() |
1.8 | 9 years | prodtest | elim fsnx |
![]() |
1.10 | 9 years | prodtest | *** empty log message *** |
![]() |
1.13 | 10 years | prodtest | change limb_fit() prototype |
![]() |
1.10 | 9 years | prodtest | change init_fill() call |
![]() |
1.12 | 10 years | arta | fix bad checking |
![]() |
1.10 | 10 years | jim | add IRIS |
![]() |
1.3 | 10 years | arta | fix bad checking |
![]() |
1.6 | 12 years | arta | Changes for the porting of the egse hmi compression library from the CM tree to ... |
![]() |
1.1 | 13 years | production | initial |
![]() |
1.9 | 9 years | prodtest | Added camera anomaly bit 0x00008000 - Hao |
![]() |
1.1 | 10 years | jim | initial |
![]() |
1.5 | 9 years | production | add Q_CAM_ANOM1 |
![]() |
1.15 | 12 years | carl | #332 -Remove assert() |
![]() |
1.2 | 15 years | carl | -Fixed typo on : #define __SAVE_PACKET_TO_DAYFILE:w -Added new defines for stat... |
![]() |
1.2 | 11 years | production | update to new dir and name of in_air_cal.* |
![]() |
1.3 | 13 years | production | look for stop file |
![]() |
1.2 | 14 years | production | *** empty log message *** |
![]() |
1.1 | 15 years | production | initial |
![]() |
1.2 | 12 years | carl | #332 -Remove assert() |
![]() |
1.24 | 11 years | carl | Put back change did for ticket 316 which removes query to check if record exits ... |
![]() |
1.8 | 10 years | jim | add IRIS |
![]() |
1.2 | 10 years | prodtest | *** empty log message *** |
![]() |
1.5 | 11 years | production | *** empty log message *** |
Karen Tian |
Powered by ViewCVS 0.9.4 |