|
version 1.16, 2013/07/18 00:06:57
|
version 1.27, 2014/03/05 19:51:19
|
|
|
|
| | |
| The indices are calculated on the pixels in which the conf_disambig segment is greater than 70 and | The indices are calculated on the pixels in which the conf_disambig segment is greater than 70 and |
| pixels in which the bitmap segment is greater than 30. These ranges are selected because the CCD | pixels in which the bitmap segment is greater than 30. These ranges are selected because the CCD |
| coordinate bitmaps are interpolated. |
coordinate bitmaps are interpolated for certain data (at the time of this CVS submit, all data |
| |
prior to 2013.08.21_17:24:00_TAI contain interpolated bitmaps; data post-2013.08.21_17:24:00_TAI |
| |
contain nearest-neighbor bitmaps). |
| | |
| In the CCD coordinates, this means that we are selecting the pixels that equal 90 in conf_disambig | In the CCD coordinates, this means that we are selecting the pixels that equal 90 in conf_disambig |
| and the pixels that equal 33 or 44 in bitmap. Here are the definitions of the pixel values: |
and the pixels that equal 33 or 34 in bitmap. Here are the definitions of the pixel values: |
| | |
| For conf_disambig: | For conf_disambig: |
| 50 : not all solutions agree (weak field method applied) | 50 : not all solutions agree (weak field method applied) |
|
|
|
| | |
| Written by Monica Bobra 15 August 2012 | Written by Monica Bobra 15 August 2012 |
| Potential Field code (appended) written by Keiji Hayashi | Potential Field code (appended) written by Keiji Hayashi |
| |
Error analysis modification 21 October 2013 |
| | |
| ===========================================*/ | ===========================================*/ |
| #include <math.h> | #include <math.h> |
|
|
|
| // To convert G to G*cm^2, simply multiply by the number of square centimeters per pixel. | // To convert G to G*cm^2, simply multiply by the number of square centimeters per pixel. |
| // As an order of magnitude estimate, we can assign 0.5 to CDELT1 and 722500m/arcsec to (RSUN_REF/RSUN_OBS). | // As an order of magnitude estimate, we can assign 0.5 to CDELT1 and 722500m/arcsec to (RSUN_REF/RSUN_OBS). |
| // (Gauss/pix^2)(CDELT1)^2(RSUN_REF/RSUN_OBS)^2(100.cm/m)^2 | // (Gauss/pix^2)(CDELT1)^2(RSUN_REF/RSUN_OBS)^2(100.cm/m)^2 |
| // =(Gauss/pix^2)(0.5 arcsec/pix)^2(722500m/arcsec)^2(100cm/m)^2 |
// =Gauss*cm^2 |
| // =(1.30501e15)Gauss*cm^2 |
|
| |
|
| // The disambig mask value selects only the pixels with values of 5 or 7 -- that is, |
|
| // 5: pixels for which the radial acute disambiguation solution was chosen |
|
| // 7: pixels for which the radial acute and NRWA disambiguation agree |
|
| | |
| int computeAbsFlux(float *bz_err, float *bz, int *dims, float *absFlux, | int computeAbsFlux(float *bz_err, float *bz, int *dims, float *absFlux, |
| float *mean_vf_ptr, float *mean_vf_err_ptr, float *count_mask_ptr, int *mask, | float *mean_vf_ptr, float *mean_vf_err_ptr, float *count_mask_ptr, int *mask, |
| Line 93 int computeAbsFlux(float *bz_err, float |
|
| Line 91 int computeAbsFlux(float *bz_err, float |
|
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| sum += (fabs(bz[j * nx + i])); | sum += (fabs(bz[j * nx + i])); |
| //printf("i,j,bz[j * nx + i]=%d,%d,%f\n",i,j,bz[j * nx + i]); |
|
| err += bz_err[j * nx + i]*bz_err[j * nx + i]; | err += bz_err[j * nx + i]*bz_err[j * nx + i]; |
| count_mask++; | count_mask++; |
| } | } |
| Line 102 int computeAbsFlux(float *bz_err, float |
|
| Line 99 int computeAbsFlux(float *bz_err, float |
|
| *mean_vf_ptr = sum*cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0; | *mean_vf_ptr = sum*cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0; |
| *mean_vf_err_ptr = (sqrt(err))*fabs(cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0); // error in the unsigned flux | *mean_vf_err_ptr = (sqrt(err))*fabs(cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0); // error in the unsigned flux |
| *count_mask_ptr = count_mask; | *count_mask_ptr = count_mask; |
| //printf("cdelt1=%f\n",cdelt1); |
|
| //printf("rsun_obs=%f\n",rsun_obs); |
|
| //printf("rsun_ref=%f\n",rsun_ref); |
|
| //printf("CMASK=%g\n",*count_mask_ptr); |
|
| //printf("USFLUX=%g\n",*mean_vf_ptr); |
|
| //printf("sum=%f\n",sum); |
|
| //printf("USFLUX_err=%g\n",*mean_vf_err_ptr); |
|
| return 0; | return 0; |
| } | } |
| | |
| Line 135 int computeBh(float *bx_err, float *by_e |
|
| Line 125 int computeBh(float *bx_err, float *by_e |
|
| { | { |
| for (j = 0; j < ny; j++) | for (j = 0; j < ny; j++) |
| { | { |
| if isnan(bx[j * nx + i]) continue; |
if isnan(bx[j * nx + i]) |
| if isnan(by[j * nx + i]) continue; |
{ |
| |
bh[j * nx + i] = NAN; |
| |
bh_err[j * nx + i] = NAN; |
| |
continue; |
| |
} |
| |
if isnan(by[j * nx + i]) |
| |
{ |
| |
bh[j * nx + i] = NAN; |
| |
bh_err[j * nx + i] = NAN; |
| |
continue; |
| |
} |
| bh[j * nx + i] = sqrt( bx[j * nx + i]*bx[j * nx + i] + by[j * nx + i]*by[j * nx + i] ); | bh[j * nx + i] = sqrt( bx[j * nx + i]*bx[j * nx + i] + by[j * nx + i]*by[j * nx + i] ); |
| sum += bh[j * nx + i]; | sum += bh[j * nx + i]; |
| bh_err[j * nx + i]=sqrt( bx[j * nx + i]*bx[j * nx + i]*bx_err[j * nx + i]*bx_err[j * nx + i] + by[j * nx + i]*by[j * nx + i]*by_err[j * nx + i]*by_err[j * nx + i])/ bh[j * nx + i]; | bh_err[j * nx + i]=sqrt( bx[j * nx + i]*bx[j * nx + i]*bx_err[j * nx + i]*bx_err[j * nx + i] + by[j * nx + i]*by[j * nx + i]*by_err[j * nx + i]*by_err[j * nx + i])/ bh[j * nx + i]; |
| Line 152 int computeBh(float *bx_err, float *by_e |
|
| Line 152 int computeBh(float *bx_err, float *by_e |
|
| /*===========================================*/ | /*===========================================*/ |
| /* Example function 3: Calculate Gamma in units of degrees */ | /* Example function 3: Calculate Gamma in units of degrees */ |
| // Native units of atan(x) are in radians; to convert from radians to degrees, multiply by (180./PI) | // Native units of atan(x) are in radians; to convert from radians to degrees, multiply by (180./PI) |
| // Redo calculation in radians for error analysis (since derivatives are only true in units of radians). |
// |
| |
// Error analysis calculations are done in radians (since derivatives are only true in units of radians), |
| |
// and multiplied by (180./PI) at the end for consistency in units. |
| | |
| int computeGamma(float *bz_err, float *bh_err, float *bx, float *by, float *bz, float *bh, int *dims, | int computeGamma(float *bz_err, float *bh_err, float *bx, float *by, float *bz, float *bh, int *dims, |
| float *mean_gamma_ptr, float *mean_gamma_err_ptr, int *mask, int *bitmask) | float *mean_gamma_ptr, float *mean_gamma_err_ptr, int *mask, int *bitmask) |
| Line 178 int computeGamma(float *bz_err, float *b |
|
| Line 180 int computeGamma(float *bz_err, float *b |
|
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| if isnan(bz_err[j * nx + i]) continue; | if isnan(bz_err[j * nx + i]) continue; |
| if isnan(bh_err[j * nx + i]) continue; | if isnan(bh_err[j * nx + i]) continue; |
| |
if isnan(bh[j * nx + i]) continue; |
| if (bz[j * nx + i] == 0) continue; | if (bz[j * nx + i] == 0) continue; |
| sum += (atan(fabs(bz[j * nx + i]/bh[j * nx + i] )))*(180./PI); |
sum += fabs(atan(bh[j * nx + i]/fabs(bz[j * nx + i])))*(180./PI); |
| err += (( sqrt ( ((bz_err[j * nx + i]*bz_err[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i])) + ((bh_err[j * nx + i]*bh_err[j * nx + i])/(bh[j * nx + i]*bh[j * nx + i]))) * fabs(bz[j * nx + i]/bh[j * nx + i]) ) / (1 + (bz[j * nx + i]/bh[j * nx + i])*(bz[j * nx + i]/bh[j * nx + i]))) *(180./PI); |
err += (1/(1+((bh[j * nx + i]*bh[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i]))))*(1/(1+((bh[j * nx + i]*bh[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i])))) * |
| |
( ((bh_err[j * nx + i]*bh_err[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i])) + |
| |
((bh[j * nx + i]*bh[j * nx + i]*bz_err[j * nx + i]*bz_err[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i]*bz[j * nx + i]*bz[j * nx + i])) ); |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| } | } |
| | |
| *mean_gamma_ptr = sum/count_mask; | *mean_gamma_ptr = sum/count_mask; |
| *mean_gamma_err_ptr = (sqrt(err*err))/(count_mask*100.0); // error in the quantity (sum)/(count_mask) |
*mean_gamma_err_ptr = (sqrt(err)/(count_mask))*(180./PI); |
| //printf("MEANGAM=%f\n",*mean_gamma_ptr); | //printf("MEANGAM=%f\n",*mean_gamma_ptr); |
| //printf("MEANGAM_err=%f\n",*mean_gamma_err_ptr); | //printf("MEANGAM_err=%f\n",*mean_gamma_err_ptr); |
| return 0; | return 0; |
| Line 212 int computeB_total(float *bx_err, float |
|
| Line 217 int computeB_total(float *bx_err, float |
|
| { | { |
| for (j = 0; j < ny; j++) | for (j = 0; j < ny; j++) |
| { | { |
| if isnan(bx[j * nx + i]) continue; |
if isnan(bx[j * nx + i]) |
| if isnan(by[j * nx + i]) continue; |
{ |
| if isnan(bz[j * nx + i]) continue; |
bt[j * nx + i] = NAN; |
| |
bt_err[j * nx + i] = NAN; |
| |
continue; |
| |
} |
| |
if isnan(by[j * nx + i]) |
| |
{ |
| |
bt[j * nx + i] = NAN; |
| |
bt_err[j * nx + i] = NAN; |
| |
continue; |
| |
} |
| |
if isnan(bz[j * nx + i]) |
| |
{ |
| |
bt[j * nx + i] = NAN; |
| |
bt_err[j * nx + i] = NAN; |
| |
continue; |
| |
} |
| bt[j * nx + i] = sqrt( bx[j * nx + i]*bx[j * nx + i] + by[j * nx + i]*by[j * nx + i] + bz[j * nx + i]*bz[j * nx + i]); | bt[j * nx + i] = sqrt( bx[j * nx + i]*bx[j * nx + i] + by[j * nx + i]*by[j * nx + i] + bz[j * nx + i]*bz[j * nx + i]); |
| bt_err[j * nx + i]=sqrt(bx[j * nx + i]*bx[j * nx + i]*bx_err[j * nx + i]*bx_err[j * nx + i] + by[j * nx + i]*by[j * nx + i]*by_err[j * nx + i]*by_err[j * nx + i] + bz[j * nx + i]*bz[j * nx + i]*bz_err[j * nx + i]*bz_err[j * nx + i] )/bt[j * nx + i]; | bt_err[j * nx + i]=sqrt(bx[j * nx + i]*bx[j * nx + i]*bx_err[j * nx + i]*bx_err[j * nx + i] + by[j * nx + i]*by[j * nx + i]*by_err[j * nx + i]*by_err[j * nx + i] + bz[j * nx + i]*bz[j * nx + i]*bz_err[j * nx + i]*bz_err[j * nx + i] )/bt[j * nx + i]; |
| } | } |
| Line 284 int computeBtotalderivative(float *bt, i |
|
| Line 304 int computeBtotalderivative(float *bt, i |
|
| } | } |
| | |
| | |
| for (i = 0; i <= nx-1; i++) |
for (i = 1; i <= nx-2; i++) |
| { | { |
| for (j = 0; j <= ny-1; j++) |
for (j = 1; j <= ny-2; j++) |
| { | { |
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| |
if ( (derx_bt[j * nx + i] + dery_bt[j * nx + i]) == 0) continue; |
| |
if isnan(bt[j * nx + i]) continue; |
| |
if isnan(bt[(j+1) * nx + i]) continue; |
| |
if isnan(bt[(j-1) * nx + i]) continue; |
| |
if isnan(bt[j * nx + i-1]) continue; |
| |
if isnan(bt[j * nx + i+1]) continue; |
| |
if isnan(bt_err[j * nx + i]) continue; |
| if isnan(derx_bt[j * nx + i]) continue; | if isnan(derx_bt[j * nx + i]) continue; |
| if isnan(dery_bt[j * nx + i]) continue; | if isnan(dery_bt[j * nx + i]) continue; |
| sum += sqrt( derx_bt[j * nx + i]*derx_bt[j * nx + i] + dery_bt[j * nx + i]*dery_bt[j * nx + i] ); /* Units of Gauss */ | sum += sqrt( derx_bt[j * nx + i]*derx_bt[j * nx + i] + dery_bt[j * nx + i]*dery_bt[j * nx + i] ); /* Units of Gauss */ |
| err += (2.0)*bt_err[j * nx + i]*bt_err[j * nx + i]; |
err += (((bt[(j+1) * nx + i]-bt[(j-1) * nx + i])*(bt[(j+1) * nx + i]-bt[(j-1) * nx + i])) * (bt_err[(j+1) * nx + i]*bt_err[(j+1) * nx + i] + bt_err[(j-1) * nx + i]*bt_err[(j-1) * nx + i])) / (16.0*( derx_bt[j * nx + i]*derx_bt[j * nx + i] + dery_bt[j * nx + i]*dery_bt[j * nx + i] ))+ |
| |
(((bt[j * nx + (i+1)]-bt[j * nx + (i-1)])*(bt[j * nx + (i+1)]-bt[j * nx + (i-1)])) * (bt_err[j * nx + (i+1)]*bt_err[j * nx + (i+1)] + bt_err[j * nx + (i-1)]*bt_err[j * nx + (i-1)])) / (16.0*( derx_bt[j * nx + i]*derx_bt[j * nx + i] + dery_bt[j * nx + i]*dery_bt[j * nx + i] )) ; |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| | |
| *mean_derivative_btotal_ptr = (sum)/(count_mask); // would be divided by ((nx-2)*(ny-2)) if shape of count_mask = shape of magnetogram |
*mean_derivative_btotal_ptr = (sum)/(count_mask); |
| *mean_derivative_btotal_err_ptr = (sqrt(err))/(count_mask); // error in the quantity (sum)/(count_mask) |
*mean_derivative_btotal_err_ptr = (sqrt(err))/(count_mask); |
| //printf("MEANGBT=%f\n",*mean_derivative_btotal_ptr); | //printf("MEANGBT=%f\n",*mean_derivative_btotal_ptr); |
| //printf("MEANGBT_err=%f\n",*mean_derivative_btotal_err_ptr); | //printf("MEANGBT_err=%f\n",*mean_derivative_btotal_err_ptr); |
| |
|
| return 0; | return 0; |
| } | } |
| | |
| Line 372 int computeBhderivative(float *bh, float |
|
| Line 401 int computeBhderivative(float *bh, float |
|
| for (j = 0; j <= ny-1; j++) | for (j = 0; j <= ny-1; j++) |
| { | { |
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| |
if ( (derx_bh[j * nx + i] + dery_bh[j * nx + i]) == 0) continue; |
| |
if isnan(bh[j * nx + i]) continue; |
| |
if isnan(bh[(j+1) * nx + i]) continue; |
| |
if isnan(bh[(j-1) * nx + i]) continue; |
| |
if isnan(bh[j * nx + i-1]) continue; |
| |
if isnan(bh[j * nx + i+1]) continue; |
| |
if isnan(bh_err[j * nx + i]) continue; |
| if isnan(derx_bh[j * nx + i]) continue; | if isnan(derx_bh[j * nx + i]) continue; |
| if isnan(dery_bh[j * nx + i]) continue; | if isnan(dery_bh[j * nx + i]) continue; |
| sum += sqrt( derx_bh[j * nx + i]*derx_bh[j * nx + i] + dery_bh[j * nx + i]*dery_bh[j * nx + i] ); /* Units of Gauss */ | sum += sqrt( derx_bh[j * nx + i]*derx_bh[j * nx + i] + dery_bh[j * nx + i]*dery_bh[j * nx + i] ); /* Units of Gauss */ |
| err += (2.0)*bh_err[j * nx + i]*bh_err[j * nx + i]; |
err += (((bh[(j+1) * nx + i]-bh[(j-1) * nx + i])*(bh[(j+1) * nx + i]-bh[(j-1) * nx + i])) * (bh_err[(j+1) * nx + i]*bh_err[(j+1) * nx + i] + bh_err[(j-1) * nx + i]*bh_err[(j-1) * nx + i])) / (16.0*( derx_bh[j * nx + i]*derx_bh[j * nx + i] + dery_bh[j * nx + i]*dery_bh[j * nx + i] ))+ |
| |
(((bh[j * nx + (i+1)]-bh[j * nx + (i-1)])*(bh[j * nx + (i+1)]-bh[j * nx + (i-1)])) * (bh_err[j * nx + (i+1)]*bh_err[j * nx + (i+1)] + bh_err[j * nx + (i-1)]*bh_err[j * nx + (i-1)])) / (16.0*( derx_bh[j * nx + i]*derx_bh[j * nx + i] + dery_bh[j * nx + i]*dery_bh[j * nx + i] )) ; |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| Line 460 int computeBzderivative(float *bz, float |
|
| Line 497 int computeBzderivative(float *bz, float |
|
| { | { |
| for (j = 0; j <= ny-1; j++) | for (j = 0; j <= ny-1; j++) |
| { | { |
| // if ( (derx_bz[j * nx + i]-dery_bz[j * nx + i]) == 0) continue; |
|
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| |
if ( (derx_bz[j * nx + i] + dery_bz[j * nx + i]) == 0) continue; |
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| //if isnan(bz_err[j * nx + i]) continue; |
if isnan(bz[(j+1) * nx + i]) continue; |
| |
if isnan(bz[(j-1) * nx + i]) continue; |
| |
if isnan(bz[j * nx + i-1]) continue; |
| |
if isnan(bz[j * nx + i+1]) continue; |
| |
if isnan(bz_err[j * nx + i]) continue; |
| if isnan(derx_bz[j * nx + i]) continue; | if isnan(derx_bz[j * nx + i]) continue; |
| if isnan(dery_bz[j * nx + i]) continue; | if isnan(dery_bz[j * nx + i]) continue; |
| sum += sqrt( derx_bz[j * nx + i]*derx_bz[j * nx + i] + dery_bz[j * nx + i]*dery_bz[j * nx + i] ); /* Units of Gauss */ | sum += sqrt( derx_bz[j * nx + i]*derx_bz[j * nx + i] + dery_bz[j * nx + i]*dery_bz[j * nx + i] ); /* Units of Gauss */ |
| err += 2.0*bz_err[j * nx + i]*bz_err[j * nx + i]; |
err += (((bz[(j+1) * nx + i]-bz[(j-1) * nx + i])*(bz[(j+1) * nx + i]-bz[(j-1) * nx + i])) * (bz_err[(j+1) * nx + i]*bz_err[(j+1) * nx + i] + bz_err[(j-1) * nx + i]*bz_err[(j-1) * nx + i])) / |
| |
(16.0*( derx_bz[j * nx + i]*derx_bz[j * nx + i] + dery_bz[j * nx + i]*dery_bz[j * nx + i] )) + |
| |
(((bz[j * nx + (i+1)]-bz[j * nx + (i-1)])*(bz[j * nx + (i+1)]-bz[j * nx + (i-1)])) * (bz_err[j * nx + (i+1)]*bz_err[j * nx + (i+1)] + bz_err[j * nx + (i-1)]*bz_err[j * nx + (i-1)])) / |
| |
(16.0*( derx_bz[j * nx + i]*derx_bz[j * nx + i] + dery_bz[j * nx + i]*dery_bz[j * nx + i] )) ; |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| Line 580 int computeJz(float *bx_err, float *by_e |
|
| Line 624 int computeJz(float *bx_err, float *by_e |
|
| dery[j * nx + i] = ( (3*bx[j * nx + i]) + (-4*bx[(j-1) * nx + i]) - (-bx[(j-2) * nx + i]) )*0.5; | dery[j * nx + i] = ( (3*bx[j * nx + i]) + (-4*bx[(j-1) * nx + i]) - (-bx[(j-2) * nx + i]) )*0.5; |
| } | } |
| | |
| |
for (i = 1; i <= nx-2; i++) |
| for (i = 0; i <= nx-1; i++) |
|
| { | { |
| for (j = 0; j <= ny-1; j++) |
for (j = 1; j <= ny-2; j++) |
| { | { |
| // calculate jz at all points | // calculate jz at all points |
| |
|
| jz[j * nx + i] = (derx[j * nx + i]-dery[j * nx + i]); // jz is in units of Gauss/pix | jz[j * nx + i] = (derx[j * nx + i]-dery[j * nx + i]); // jz is in units of Gauss/pix |
| jz_err[j * nx + i] = 0.5*sqrt( (bx_err[(j+1) * nx + i]*bx_err[(j+1) * nx + i]) + (bx_err[(j-1) * nx + i]*bx_err[(j-1) * nx + i]) + | jz_err[j * nx + i] = 0.5*sqrt( (bx_err[(j+1) * nx + i]*bx_err[(j+1) * nx + i]) + (bx_err[(j-1) * nx + i]*bx_err[(j-1) * nx + i]) + |
| (by_err[j * nx + (i+1)]*by_err[j * nx + (i+1)]) + (by_err[j * nx + (i-1)]*by_err[j * nx + (i-1)]) ) ; | (by_err[j * nx + (i+1)]*by_err[j * nx + (i+1)]) + (by_err[j * nx + (i-1)]*by_err[j * nx + (i-1)]) ) ; |
| jz_err_squared[j * nx + i]= (jz_err[j * nx + i]*jz_err[j * nx + i]); | jz_err_squared[j * nx + i]= (jz_err[j * nx + i]*jz_err[j * nx + i]); |
| count_mask++; | count_mask++; |
| |
|
| } | } |
| } | } |
| |
|
| return 0; | return 0; |
| } | } |
| | |
| /*===========================================*/ | /*===========================================*/ |
| | |
| |
|
| /* Example function 9: Compute quantities on Jz array */ | /* Example function 9: Compute quantities on Jz array */ |
| // Compute mean and total current on Jz array. | // Compute mean and total current on Jz array. |
| | |
| Line 638 int computeJzsmooth(float *bx, float *by |
|
| Line 681 int computeJzsmooth(float *bx, float *by |
|
| | |
| /* Calculate mean vertical current density (mean_jz) and total unsigned vertical current (us_i) using smoothed Jz array and continue conditions above */ | /* Calculate mean vertical current density (mean_jz) and total unsigned vertical current (us_i) using smoothed Jz array and continue conditions above */ |
| *mean_jz_ptr = curl/(count_mask); /* mean_jz gets populated as MEANJZD */ | *mean_jz_ptr = curl/(count_mask); /* mean_jz gets populated as MEANJZD */ |
| *mean_jz_err_ptr = (sqrt(err))*fabs(((rsun_obs/rsun_ref)*(0.00010)*(1/MUNAUGHT)*(1000.))/(count_mask)); // error in the quantity MEANJZD |
*mean_jz_err_ptr = (sqrt(err)/count_mask)*((1/cdelt1)*(rsun_obs/rsun_ref)*(0.00010)*(1/MUNAUGHT)*(1000.)); // error in the quantity MEANJZD |
| | |
| *us_i_ptr = (us_i); /* us_i gets populated as TOTUSJZ */ | *us_i_ptr = (us_i); /* us_i gets populated as TOTUSJZ */ |
| *us_i_err_ptr = (sqrt(err))*fabs((cdelt1/1)*(rsun_ref/rsun_obs)*(0.00010)*(1/MUNAUGHT)); // error in the quantity TOTUSJZ |
*us_i_err_ptr = (sqrt(err))*((cdelt1/1)*(rsun_ref/rsun_obs)*(0.00010)*(1/MUNAUGHT)); // error in the quantity TOTUSJZ |
| | |
| //printf("MEANJZD=%f\n",*mean_jz_ptr); | //printf("MEANJZD=%f\n",*mean_jz_ptr); |
| //printf("MEANJZD_err=%f\n",*mean_jz_err_ptr); | //printf("MEANJZD_err=%f\n",*mean_jz_err_ptr); |
| Line 658 int computeJzsmooth(float *bx, float *by |
|
| Line 701 int computeJzsmooth(float *bx, float *by |
|
| /* Example function 10: Twist Parameter, alpha */ | /* Example function 10: Twist Parameter, alpha */ |
| | |
| // The twist parameter, alpha, is defined as alpha = Jz/Bz. In this case, the calculation | // The twist parameter, alpha, is defined as alpha = Jz/Bz. In this case, the calculation |
| // for alpha is calculated in the following way (different from Leka and Barnes' approach): |
// for alpha is weighted by Bz (following Hagino et al., http://adsabs.harvard.edu/abs/2004PASJ...56..831H): |
| | |
| // (sum of all positive Bz + abs(sum of all negative Bz)) = avg Bz |
// numerator = sum of all Jz*Bz |
| // (abs(sum of all Jz at positive Bz) + abs(sum of all Jz at negative Bz)) = avg Jz |
// denominator = sum of Bz*Bz |
| // avg alpha = avg Jz / avg Bz |
// alpha = numerator/denominator |
| |
|
| // The sign is assigned as follows: |
|
| // If the sum of all Bz is greater than 0, then evaluate the sum of Jz at the positive Bz pixels. |
|
| // If this value is > 0, then alpha is > 0. |
|
| // If this value is < 0, then alpha is <0. |
|
| // |
|
| // If the sum of all Bz is less than 0, then evaluate the sum of Jz at the negative Bz pixels. |
|
| // If this value is > 0, then alpha is < 0. |
|
| // If this value is < 0, then alpha is > 0. |
|
| | |
| // The units of alpha are in 1/Mm | // The units of alpha are in 1/Mm |
| // The units of Jz are in Gauss/pix; the units of Bz are in Gauss. | // The units of Jz are in Gauss/pix; the units of Bz are in Gauss. |
| Line 687 int computeAlpha(float *jz_err, float *b |
|
| Line 721 int computeAlpha(float *jz_err, float *b |
|
| int ny = dims[1]; | int ny = dims[1]; |
| int i = 0; | int i = 0; |
| int j = 0; | int j = 0; |
| int count_mask = 0; |
double alpha_total = 0.0; |
| double a = 0.0; |
double C = ((1/cdelt1)*(rsun_obs/rsun_ref)*(1000000.)); |
| double b = 0.0; |
double total = 0.0; |
| double c = 0.0; |
double A = 0.0; |
| double d = 0.0; |
double B = 0.0; |
| double sum1 = 0.0; |
|
| double sum2 = 0.0; |
|
| double sum3 = 0.0; |
|
| double sum4 = 0.0; |
|
| double sum = 0.0; |
|
| double sum5 = 0.0; |
|
| double sum6 = 0.0; |
|
| double sum_err = 0.0; |
|
| | |
| if (nx <= 0 || ny <= 0) return 1; | if (nx <= 0 || ny <= 0) return 1; |
| |
|
| for (i = 1; i < nx-1; i++) | for (i = 1; i < nx-1; i++) |
| { | { |
| for (j = 1; j < ny-1; j++) | for (j = 1; j < ny-1; j++) |
| Line 711 int computeAlpha(float *jz_err, float *b |
|
| Line 736 int computeAlpha(float *jz_err, float *b |
|
| if isnan(jz[j * nx + i]) continue; | if isnan(jz[j * nx + i]) continue; |
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| if (jz[j * nx + i] == 0.0) continue; | if (jz[j * nx + i] == 0.0) continue; |
| if (bz_err[j * nx + i] == 0.0) continue; |
|
| if (bz[j * nx + i] == 0.0) continue; | if (bz[j * nx + i] == 0.0) continue; |
| if (bz[j * nx + i] > 0) sum1 += ( bz[j * nx + i] ); a++; |
A += jz[j*nx+i]*bz[j*nx+i]; |
| if (bz[j * nx + i] <= 0) sum2 += ( bz[j * nx + i] ); b++; |
B += bz[j*nx+i]*bz[j*nx+i]; |
| if (bz[j * nx + i] > 0) sum3 += ( jz[j * nx + i] ); c++; |
|
| if (bz[j * nx + i] <= 0) sum4 += ( jz[j * nx + i] ); d++; |
|
| sum5 += bz[j * nx + i]; |
|
| /* sum_err is a fractional uncertainty */ |
|
| sum_err += sqrt(((jz_err[j * nx + i]*jz_err[j * nx + i])/(jz[j * nx + i]*jz[j * nx + i])) + ((bz_err[j * nx + i]*bz_err[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i]))) * fabs( ( (jz[j * nx + i]) / (bz[j * nx + i]) ) *(1/cdelt1)*(rsun_obs/rsun_ref)*(1000000.)); |
|
| count_mask++; |
|
| } | } |
| } | } |
| | |
| sum = (((fabs(sum3))+(fabs(sum4)))/((fabs(sum2))+sum1))*((1/cdelt1)*(rsun_obs/rsun_ref)*(1000000.)); /* the units for (jz/bz) are 1/Mm */ |
for (i = 1; i < nx-1; i++) |
| |
{ |
| /* Determine the sign of alpha */ |
for (j = 1; j < ny-1; j++) |
| if ((sum5 > 0) && (sum3 > 0)) sum=sum; |
{ |
| if ((sum5 > 0) && (sum3 <= 0)) sum=-sum; |
if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| if ((sum5 < 0) && (sum4 <= 0)) sum=sum; |
if isnan(jz[j * nx + i]) continue; |
| if ((sum5 < 0) && (sum4 > 0)) sum=-sum; |
if isnan(bz[j * nx + i]) continue; |
| |
if (jz[j * nx + i] == 0.0) continue; |
| *mean_alpha_ptr = sum; /* Units are 1/Mm */ |
if (bz[j * nx + i] == 0.0) continue; |
| *mean_alpha_err_ptr = (sqrt(sum_err*sum_err)) / ((a+b+c+d)*100.0); // error in the quantity (sum)/(count_mask); factor of 100 comes from converting percent |
total += bz[j*nx+i]*bz[j*nx+i]*jz_err[j*nx+i]*jz_err[j*nx+i] + (jz[j*nx+i]-2*bz[j*nx+i]*A/B)*(jz[j*nx+i]-2*bz[j*nx+i]*A/B)*bz_err[j*nx+i]*bz_err[j*nx+i]; |
| |
} |
| |
} |
| | |
| //printf("MEANALP=%f\n",*mean_alpha_ptr); |
/* Determine the absolute value of alpha. The units for alpha are 1/Mm */ |
| //printf("MEANALP_err=%f\n",*mean_alpha_err_ptr); |
alpha_total = ((A/B)*C); |
| |
*mean_alpha_ptr = alpha_total; |
| |
*mean_alpha_err_ptr = (C/B)*(sqrt(total)); |
| | |
| return 0; | return 0; |
| } | } |
| Line 763 int computeHelicity(float *jz_err, float |
|
| Line 785 int computeHelicity(float *jz_err, float |
|
| int count_mask = 0; | int count_mask = 0; |
| double sum = 0.0; | double sum = 0.0; |
| double sum2 = 0.0; | double sum2 = 0.0; |
| double sum_err = 0.0; |
double err = 0.0; |
| | |
| if (nx <= 0 || ny <= 0) return 1; | if (nx <= 0 || ny <= 0) return 1; |
| | |
| Line 774 int computeHelicity(float *jz_err, float |
|
| Line 796 int computeHelicity(float *jz_err, float |
|
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| if isnan(jz[j * nx + i]) continue; | if isnan(jz[j * nx + i]) continue; |
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| |
if isnan(jz_err[j * nx + i]) continue; |
| |
if isnan(bz_err[j * nx + i]) continue; |
| if (bz[j * nx + i] == 0.0) continue; | if (bz[j * nx + i] == 0.0) continue; |
| if (jz[j * nx + i] == 0.0) continue; | if (jz[j * nx + i] == 0.0) continue; |
| sum += (jz[j * nx + i]*bz[j * nx + i])*(1/cdelt1)*(rsun_obs/rsun_ref); // contributes to MEANJZH and ABSNJZH | sum += (jz[j * nx + i]*bz[j * nx + i])*(1/cdelt1)*(rsun_obs/rsun_ref); // contributes to MEANJZH and ABSNJZH |
| sum2 += fabs(jz[j * nx + i]*bz[j * nx + i])*(1/cdelt1)*(rsun_obs/rsun_ref); // contributes to TOTUSJH | sum2 += fabs(jz[j * nx + i]*bz[j * nx + i])*(1/cdelt1)*(rsun_obs/rsun_ref); // contributes to TOTUSJH |
| sum_err += sqrt(((jz_err[j * nx + i]*jz_err[j * nx + i])/(jz[j * nx + i]*jz[j * nx + i])) + ((bz_err[j * nx + i]*bz_err[j * nx + i])/(bz[j * nx + i]*bz[j * nx + i]))) * fabs(jz[j * nx + i]*bz[j * nx + i]*(1/cdelt1)*(rsun_obs/rsun_ref)); |
err += (jz_err[j * nx + i]*jz_err[j * nx + i]*bz[j * nx + i]*bz[j * nx + i]) + (bz_err[j * nx + i]*bz_err[j * nx + i]*jz[j * nx + i]*jz[j * nx + i]); |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| Line 787 int computeHelicity(float *jz_err, float |
|
| Line 811 int computeHelicity(float *jz_err, float |
|
| *total_us_ih_ptr = sum2 ; /* Units are G^2 / m ; keyword is TOTUSJH */ | *total_us_ih_ptr = sum2 ; /* Units are G^2 / m ; keyword is TOTUSJH */ |
| *total_abs_ih_ptr = fabs(sum) ; /* Units are G^2 / m ; keyword is ABSNJZH */ | *total_abs_ih_ptr = fabs(sum) ; /* Units are G^2 / m ; keyword is ABSNJZH */ |
| | |
| *mean_ih_err_ptr = (sqrt(sum_err*sum_err)) / (count_mask*100.0) ; // error in the quantity MEANJZH |
*mean_ih_err_ptr = (sqrt(err)/count_mask)*(1/cdelt1)*(rsun_obs/rsun_ref) ; // error in the quantity MEANJZH |
| *total_us_ih_err_ptr = (sqrt(sum_err*sum_err)) / (100.0) ; // error in the quantity TOTUSJH |
*total_us_ih_err_ptr = (sqrt(err))*(1/cdelt1)*(rsun_obs/rsun_ref) ; // error in the quantity TOTUSJH |
| *total_abs_ih_err_ptr = (sqrt(sum_err*sum_err)) / (100.0) ; // error in the quantity ABSNJZH |
*total_abs_ih_err_ptr = (sqrt(err))*(1/cdelt1)*(rsun_obs/rsun_ref) ; // error in the quantity ABSNJZH |
| | |
| //printf("MEANJZH=%f\n",*mean_ih_ptr); | //printf("MEANJZH=%f\n",*mean_ih_ptr); |
| //printf("MEANJZH_err=%f\n",*mean_ih_err_ptr); | //printf("MEANJZH_err=%f\n",*mean_ih_err_ptr); |
| Line 836 int computeSumAbsPerPolarity(float *jz_e |
|
| Line 860 int computeSumAbsPerPolarity(float *jz_e |
|
| { | { |
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| |
if isnan(jz[j * nx + i]) continue; |
| if (bz[j * nx + i] > 0) sum1 += ( jz[j * nx + i])*(1/cdelt1)*(0.00010)*(1/MUNAUGHT)*(rsun_ref/rsun_obs); | if (bz[j * nx + i] > 0) sum1 += ( jz[j * nx + i])*(1/cdelt1)*(0.00010)*(1/MUNAUGHT)*(rsun_ref/rsun_obs); |
| if (bz[j * nx + i] <= 0) sum2 += ( jz[j * nx + i])*(1/cdelt1)*(0.00010)*(1/MUNAUGHT)*(rsun_ref/rsun_obs); | if (bz[j * nx + i] <= 0) sum2 += ( jz[j * nx + i])*(1/cdelt1)*(0.00010)*(1/MUNAUGHT)*(rsun_ref/rsun_obs); |
| err += (jz_err[j * nx + i]*jz_err[j * nx + i]); | err += (jz_err[j * nx + i]*jz_err[j * nx + i]); |
| Line 889 int computeFreeEnergy(float *bx_err, flo |
|
| Line 914 int computeFreeEnergy(float *bx_err, flo |
|
| if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; | if ( mask[j * nx + i] < 70 || bitmask[j * nx + i] < 30 ) continue; |
| if isnan(bx[j * nx + i]) continue; | if isnan(bx[j * nx + i]) continue; |
| if isnan(by[j * nx + i]) continue; | if isnan(by[j * nx + i]) continue; |
| sum += ( ((bpx[j * nx + i] - bx[j * nx + i])*(bpx[j * nx + i] - bx[j * nx + i])) + ((bpy[j * nx + i] - by[j * nx + i])*(bpy[j * nx + i] - by[j * nx + i])) )*(cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0); |
sum += ( ((bx[j * nx + i] - bpx[j * nx + i])*(bx[j * nx + i] - bpx[j * nx + i])) + ((by[j * nx + i] - bpy[j * nx + i])*(by[j * nx + i] - bpy[j * nx + i])) )*(cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0); |
| sum1 += ( ((bpx[j * nx + i] - bx[j * nx + i])*(bpx[j * nx + i] - bx[j * nx + i])) + ((bpy[j * nx + i] - by[j * nx + i])*(bpy[j * nx + i] - by[j * nx + i])) ); |
sum1 += ( ((bx[j * nx + i] - bpx[j * nx + i])*(bx[j * nx + i] - bpx[j * nx + i])) + ((by[j * nx + i] - bpy[j * nx + i])*(by[j * nx + i] - bpy[j * nx + i])) ); |
| err += (4.0*bx[j * nx + i]*bx[j * nx + i]*bx_err[j * nx + i]*bx_err[j * nx + i]) + (4.0*by[j * nx + i]*by[j * nx + i]*by_err[j * nx + i]*by_err[j * nx + i]); |
err += 4.0*(bx[j * nx + i] - bpx[j * nx + i])*(bx[j * nx + i] - bpx[j * nx + i])*(bx_err[j * nx + i]*bx_err[j * nx + i]) + |
| |
4.0*(by[j * nx + i] - bpy[j * nx + i])*(by[j * nx + i] - bpy[j * nx + i])*(by_err[j * nx + i]*by_err[j * nx + i]); |
| count_mask++; | count_mask++; |
| } | } |
| } | } |
| | |
| *meanpotptr = (sum1/(8.*PI)) / (count_mask); /* Units are ergs per cubic centimeter */ |
/* Units of meanpotptr are ergs per centimeter */ |
| *meanpot_err_ptr = (sqrt(err))*fabs(cdelt1*cdelt1*(rsun_ref/rsun_obs)*(rsun_ref/rsun_obs)*100.0*100.0) / (count_mask*8.*PI); // error in the quantity (sum)/(count_mask) |
*meanpotptr = (sum1) / (count_mask*8.*PI) ; /* Units are ergs per cubic centimeter */ |
| |
*meanpot_err_ptr = (sqrt(err)) / (count_mask*8.*PI); // error in the quantity (sum)/(count_mask) |
| | |
| /* Units of sum are ergs/cm^3, units of factor are cm^2/pix^2; therefore, units of totpotptr are ergs per centimeter */ | /* Units of sum are ergs/cm^3, units of factor are cm^2/pix^2; therefore, units of totpotptr are ergs per centimeter */ |
| *totpotptr = (sum)/(8.*PI); | *totpotptr = (sum)/(8.*PI); |
| Line 915 int computeFreeEnergy(float *bx_err, flo |
|
| Line 942 int computeFreeEnergy(float *bx_err, flo |
|
| /*===========================================*/ | /*===========================================*/ |
| /* Example function 14: Mean 3D shear angle, area with shear greater than 45, mean horizontal shear angle, area with horizontal shear angle greater than 45 */ | /* Example function 14: Mean 3D shear angle, area with shear greater than 45, mean horizontal shear angle, area with horizontal shear angle greater than 45 */ |
| | |
| int computeShearAngle(float *bx_err, float *by_err, float *bh_err, float *bx, float *by, float *bz, float *bpx, float *bpy, float *bpz, int *dims, |
int computeShearAngle(float *bx_err, float *by_err, float *bz_err, float *bx, float *by, float *bz, float *bpx, float *bpy, float *bpz, int *dims, |
| float *meanshear_angleptr, float *meanshear_angle_err_ptr, float *area_w_shear_gt_45ptr, int *mask, int *bitmask) | float *meanshear_angleptr, float *meanshear_angle_err_ptr, float *area_w_shear_gt_45ptr, int *mask, int *bitmask) |
| |
|
| |
|
| { | { |
| int nx = dims[0]; | int nx = dims[0]; |
| int ny = dims[1]; | int ny = dims[1]; |
| int i = 0; | int i = 0; |
| int j = 0; | int j = 0; |
| int count_mask = 0; |
float count_mask = 0; |
| |
float count = 0; |
| double dotproduct = 0.0; | double dotproduct = 0.0; |
| double magnitude_potential = 0.0; | double magnitude_potential = 0.0; |
| double magnitude_vector = 0.0; | double magnitude_vector = 0.0; |
| double shear_angle = 0.0; | double shear_angle = 0.0; |
| |
double denominator = 0.0; |
| |
double term1 = 0.0; |
| |
double term2 = 0.0; |
| |
double term3 = 0.0; |
| |
double sumsum = 0.0; |
| double err = 0.0; | double err = 0.0; |
| double sum = 0.0; |
double part1 = 0.0; |
| double count = 0.0; |
double part2 = 0.0; |
| |
double part3 = 0.0; |
| *area_w_shear_gt_45ptr = 0.0; | *area_w_shear_gt_45ptr = 0.0; |
| *meanshear_angleptr = 0.0; | *meanshear_angleptr = 0.0; |
| | |
| Line 946 int computeShearAngle(float *bx_err, flo |
|
| Line 982 int computeShearAngle(float *bx_err, flo |
|
| if isnan(bz[j * nx + i]) continue; | if isnan(bz[j * nx + i]) continue; |
| if isnan(bx[j * nx + i]) continue; | if isnan(bx[j * nx + i]) continue; |
| if isnan(by[j * nx + i]) continue; | if isnan(by[j * nx + i]) continue; |
| /* For mean 3D shear angle, area with shear greater than 45*/ |
if isnan(bx_err[j * nx + i]) continue; |
| |
if isnan(by_err[j * nx + i]) continue; |
| |
if isnan(bz_err[j * nx + i]) continue; |
| |
|
| |
/* For mean 3D shear angle, percentage with shear greater than 45*/ |
| dotproduct = (bpx[j * nx + i])*(bx[j * nx + i]) + (bpy[j * nx + i])*(by[j * nx + i]) + (bpz[j * nx + i])*(bz[j * nx + i]); | dotproduct = (bpx[j * nx + i])*(bx[j * nx + i]) + (bpy[j * nx + i])*(by[j * nx + i]) + (bpz[j * nx + i])*(bz[j * nx + i]); |
| magnitude_potential = sqrt( (bpx[j * nx + i]*bpx[j * nx + i]) + (bpy[j * nx + i]*bpy[j * nx + i]) + (bpz[j * nx + i]*bpz[j * nx + i])); | magnitude_potential = sqrt( (bpx[j * nx + i]*bpx[j * nx + i]) + (bpy[j * nx + i]*bpy[j * nx + i]) + (bpz[j * nx + i]*bpz[j * nx + i])); |
| magnitude_vector = sqrt( (bx[j * nx + i]*bx[j * nx + i]) + (by[j * nx + i]*by[j * nx + i]) + (bz[j * nx + i]*bz[j * nx + i]) ); | magnitude_vector = sqrt( (bx[j * nx + i]*bx[j * nx + i]) + (by[j * nx + i]*by[j * nx + i]) + (bz[j * nx + i]*bz[j * nx + i]) ); |
| |
//printf("dotproduct=%f\n",dotproduct); |
| |
//printf("magnitude_potential=%f\n",magnitude_potential); |
| |
//printf("magnitude_vector=%f\n",magnitude_vector); |
| |
|
| shear_angle = acos(dotproduct/(magnitude_potential*magnitude_vector))*(180./PI); | shear_angle = acos(dotproduct/(magnitude_potential*magnitude_vector))*(180./PI); |
| |
sumsum += shear_angle; |
| |
//printf("shear_angle=%f\n",shear_angle); |
| count ++; | count ++; |
| sum += shear_angle ; |
|
| err += -(1./(1.- sqrt(bx_err[j * nx + i]*bx_err[j * nx + i]+by_err[j * nx + i]*by_err[j * nx + i]+bh_err[j * nx + i]*bh_err[j * nx + i]))); |
|
| if (shear_angle > 45) count_mask ++; | if (shear_angle > 45) count_mask ++; |
| |
|
| |
// For the error analysis |
| |
|
| |
term1 = bx[j * nx + i]*by[j * nx + i]*bpy[j * nx + i] - by[j * nx + i]*by[j * nx + i]*bpx[j * nx + i] + bz[j * nx + i]*bx[j * nx + i]*bpz[j * nx + i] - bz[j * nx + i]*bz[j * nx + i]*bpx[j * nx + i]; |
| |
term2 = bx[j * nx + i]*bx[j * nx + i]*bpy[j * nx + i] - bx[j * nx + i]*by[j * nx + i]*bpx[j * nx + i] + bx[j * nx + i]*bz[j * nx + i]*bpy[j * nx + i] - bz[j * nx + i]*by[j * nx + i]*bpz[j * nx + i]; |
| |
term3 = bx[j * nx + i]*bx[j * nx + i]*bpz[j * nx + i] - bx[j * nx + i]*bz[j * nx + i]*bpx[j * nx + i] + by[j * nx + i]*by[j * nx + i]*bpz[j * nx + i] - by[j * nx + i]*bz[j * nx + i]*bpy[j * nx + i]; |
| |
|
| |
part1 = bx[j * nx + i]*bx[j * nx + i] + by[j * nx + i]*by[j * nx + i] + bz[j * nx + i]*bz[j * nx + i]; |
| |
part2 = bpx[j * nx + i]*bpx[j * nx + i] + bpy[j * nx + i]*bpy[j * nx + i] + bpz[j * nx + i]*bpz[j * nx + i]; |
| |
part3 = bx[j * nx + i]*bpx[j * nx + i] + by[j * nx + i]*bpy[j * nx + i] + bz[j * nx + i]*bpz[j * nx + i]; |
| |
|
| |
// denominator is squared |
| |
denominator = part1*part1*part1*part2*(1.0-((part3*part3)/(part1*part2))); |
| |
|
| |
err = (term1*term1*bx_err[j * nx + i]*bx_err[j * nx + i])/(denominator) + |
| |
(term1*term1*bx_err[j * nx + i]*bx_err[j * nx + i])/(denominator) + |
| |
(term1*term1*bx_err[j * nx + i]*bx_err[j * nx + i])/(denominator) ; |
| |
|
| } | } |
| } | } |
| |
|
| /* For mean 3D shear angle, area with shear greater than 45*/ | /* For mean 3D shear angle, area with shear greater than 45*/ |
| *meanshear_angleptr = (sum)/(count); /* Units are degrees */ |
*meanshear_angleptr = (sumsum)/(count); /* Units are degrees */ |
| *meanshear_angle_err_ptr = (sqrt(err*err))/(count); // error in the quantity (sum)/(count_mask) |
*meanshear_angle_err_ptr = (sqrt(err)/count_mask)*(180./PI); |
| *area_w_shear_gt_45ptr = (count_mask/(count))*(100.0);/* The area here is a fractional area -- the % of the total area */ |
|
| |
/* The area here is a fractional area -- the % of the total area. This has no error associated with it. */ |
| |
*area_w_shear_gt_45ptr = (count_mask/(count))*(100.0); |
| | |
| //printf("MEANSHR=%f\n",*meanshear_angleptr); | //printf("MEANSHR=%f\n",*meanshear_angleptr); |
| //printf("MEANSHR_err=%f\n",*meanshear_angle_err_ptr); | //printf("MEANSHR_err=%f\n",*meanshear_angle_err_ptr); |
| |
//printf("SHRGT45=%f\n",*area_w_shear_gt_45ptr); |
| |
|
| |
return 0; |
| |
} |
| |
|
| |
/*===========================================*/ |
| |
int computeR(float *bz_err, float *los, int *dims, float *Rparam, float cdelt1, |
| |
float *rim, float *p1p0, float *p1n0, float *p1p, float *p1n, float *p1, |
| |
float *pmap, int nx1, int ny1) |
| |
{ |
| |
|
| |
int nx = dims[0]; |
| |
int ny = dims[1]; |
| |
int i = 0; |
| |
int j = 0; |
| |
int index; |
| |
double sum = 0.0; |
| |
double err = 0.0; |
| |
*Rparam = 0.0; |
| |
struct fresize_struct fresboxcar, fresgauss; |
| |
int scale = round(2.0/cdelt1); |
| |
float sigma = 10.0/2.3548; |
| |
|
| |
init_fresize_boxcar(&fresboxcar,1,1); |
| |
|
| |
// set up convolution kernel |
| |
init_fresize_gaussian(&fresgauss,sigma,20,1); |
| |
|
| |
// make sure convolution kernel is smaller than or equal to array size |
| |
if ( (nx < 41.) || (ny < 41.) ) return -1; |
| |
|
| |
fsample(los, rim, nx, ny, nx, nx1, ny1, nx1, scale, 0, 0, 0.0); |
| |
for (i = 0; i < nx1; i++) |
| |
{ |
| |
for (j = 0; j < ny1; j++) |
| |
{ |
| |
index = j * nx1 + i; |
| |
if (rim[index] > 150) |
| |
p1p0[index]=1.0; |
| |
else |
| |
p1p0[index]=0.0; |
| |
if (rim[index] < -150) |
| |
p1n0[index]=1.0; |
| |
else |
| |
p1n0[index]=0.0; |
| |
} |
| |
} |
| |
|
| |
fresize(&fresboxcar, p1p0, p1p, nx1, ny1, nx1, nx1, ny1, nx1, 0, 0, 0.0); |
| |
fresize(&fresboxcar, p1n0, p1n, nx1, ny1, nx1, nx1, ny1, nx1, 0, 0, 0.0); |
| |
|
| |
for (i = 0; i < nx1; i++) |
| |
{ |
| |
for (j = 0; j < ny1; j++) |
| |
{ |
| |
index = j * nx1 + i; |
| |
if (p1p[index] > 0 && p1n[index] > 0) |
| |
p1[index]=1.0; |
| |
else |
| |
p1[index]=0.0; |
| |
} |
| |
} |
| |
|
| |
fresize(&fresgauss, p1, pmap, nx1, ny1, nx1, nx1, ny1, nx1, 0, 0, 0.0); |
| |
|
| |
for (i = 0; i < nx1; i++) |
| |
{ |
| |
for (j = 0; j < ny1; j++) |
| |
{ |
| |
index = j * nx1 + i; |
| |
sum += pmap[index]*abs(rim[index]); |
| |
} |
| |
} |
| |
|
| |
if (sum < 1.0) |
| |
*Rparam = 0.0; |
| |
else |
| |
*Rparam = log10(sum); |
| |
|
| |
free_fresize(&fresboxcar); |
| |
free_fresize(&fresgauss); |
| | |
| return 0; | return 0; |
| } | } |
| Line 1088 void greenpot(float *bx, float *by, floa |
|
| Line 1233 void greenpot(float *bx, float *by, floa |
|
| | |
| char *sw_functions_version() // Returns CVS version of sw_functions.c | char *sw_functions_version() // Returns CVS version of sw_functions.c |
| { | { |
| return strdup("$Id$"); |
return strdup("$Id"); |
| } | } |
| | |
| /* ---------------- end of this file ----------------*/ | /* ---------------- end of this file ----------------*/ |
Return to
sw_functions.c
CVS log
Up to [Development] / JSOC / proj / sharp / apps