|
Size: 3684
Comment:
|
← Revision 37 as of 2013-05-01 04:35:23 ⇥
Size: 2988
Comment: converted to 1.6 markup
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| = Data Receipt and Processing = == Data Processing == Most spacecraft mission data is typically divided into "levels" of processing and refinement. |
= Telemetry & Level 0 Data Processing = <<TableOfContents>> |
| Line 5: | Line 4: |
| * "Raw" data is the basic telemetry transferred from the spacecraft to the ground station, packaged as a file, with only basic r/f integrity checks run, and no processing done to it. * Level Zero refers to the cleanest, time-ordered set of data for a given instrument or spacecraft. Telemetry Checking, APID Lookup, Housekeeping telemetry processing and Image Reconstruction are performed at this level. The only processing done is typically the removal of duplicate data points (due to multiple file sends or a solid state recorder overlap), the removal or minimal repair of bad r/f data, the sorting of the different APIDs, and the matching of the end of one packet to the beginning of the next. The images taken by an instrument are left "as is" - not manipulated, not flat-fielded nor otherwise calibrated. All of the Level Zero data is recorded in the JSOC DRMS (database). * Level One data is "unpacked" Level Zero data, where images have been put together, bad pixels removed, and gains calibrated (i.e. flat-fielded). It is data in the cleanest state possible while remaining "pure" (no significant, irreversible data alteration). This data is time-sequenced, and quality-filtered. Expect to find Dopplergrams and Magnetograms here, along with single images. * Level Two data has been irrevocably filtered, time-sequence-merged, Fourier-transformed or otherwise changed or cleaned up from Level 0ne in a way that is irreversible. Level Two data can be re-created from Level One data, but not one cannot create Level One data from Level Two data. [[BR]] [[BR]] Important subsections of data processing include: [[BR]] |
* Level Zero refers to the lowest level of accessible data for a given instrument or spacecraft. Telemetry Checking, APID (Application ID) Lookup, Housekeeping telemetry processing and Image Reconstruction are performed at this level. The only processing done is typically the removal of duplicate data points (due to multiple file sends or a solid state recorder overlap), the removal or minimal repair of bad r/f data, the sorting of the different APIDs, and the matching of the end of one packet to the beginning of the next. The images taken by an instrument are left "as is" - not manipulated, not flat-fielded nor otherwise calibrated. All of the Level Zero data is recorded in the JSOC DRMS (database). In principle the level-0 data could be converted back to telemetry formatted data and is thus redundant with it but is in a more easily usable form using standard data storage protocols. JSOC image data is stored in compressed FITS files. JSOC metadata is stored in DRMS records but may be exported in several standard protocols (e.g. as part of exported FITS format images or tab delimited text tables). == Telemetry access information == |
| Line 16: | Line 10: |
| * ~+'''[:MOCServer:Accessing the server]''' -- Information about accessing the MOC Product Server +~ * JSOC Level Zero Software Functional Specification. http://hmi.stanford.edu/development/JSOC_Documents/Level-0-Documents/JSOC-LEVEL0-PROCESSING-FS.pdf |
* [[MOCServer|Accessing the server]] -- Information about accessing the MOC Product Server == Level 0 Processing == * JSOC Level Zero Software Functional Specification.<<BR>> http://hmi.stanford.edu/development/JSOC_Documents/Level-0-Documents/JSOC-LEVEL0-PROCESSING-FS.pdf |
| Line 19: | Line 14: |
| [[BR]] -- Includes Time and Data Quality computations | <<BR>> -- Includes Time and Data Quality computations |
| Line 21: | Line 16: |
| [[BR]] -- "Merged" Housekeeping DRMS record creation [[BR]] -- "Averaged" Housekeeping DRMS record creation * Production Data Achive (raw and level0) |
<<BR>> -- "Merged" Housekeeping DRMS record creation <<BR>> -- "Averaged" Housekeeping DRMS record creation * Housekeeping Configuration File Data Retrieval, Build, and Release to JSOC's TBL_JSOC Directory <<BR>>JSOC Level Zero Functional Specification describes this functionality in section 3.6. The url link to JSOC Level 0 Functional Specification is shown above in first bullet. Information on running scripts to get housekeeping configuration data, building neccessary data files for Level 0 Processing and checking in files to JSOC CVS system are discussed in the Users Guide at the following link. [[LEV0HKConfig|Users Guide on HK Configuration Data Retrieval, Build, and Release]] * Production Data Archive (raw and level0) |
| Line 25: | Line 22: |
| [[BR]] | |
| Line 27: | Line 23: |
| [[BR]] * Level 0.5 Processing and DRMS record creation ~+'''[:Lev0.1Doc:Level 0.1]'''+~ ~+'''[:Lev0.3Doc:Level 0.3/Level 0.5]'''+~ |
* [[Lev0.1Doc|Level 0.1 Data Processing]] * [[Lev0.3Doc|Level 0.3 Data Processing]] * [[Lev0.5Doc|Level 0.5 Data Processing ]] |
| Line 33: | Line 28: |
| * Level 1.0 Filtergram Calibration * Removal of overscan/underscan rows & columns * Identification of corrupted pixels * Application of offset and gain correction * Calculation of image center and limb position === Who uses it? === Typically, mission operations personnel and instrument operators want to see Level Zero data. It is available usually within minutes of receipt and persons very familiar with instrument/spacecraft engineering specs can make the best use of it. All kinds of raw image data and housekeeping data are present, including many useful temperatures, voltages and positions. Those requiring the most immediate spacecraft images are sometimes also Level Zero data users, such as CISM (Center for Integrated Space Weather Modeling). |
* [[HKTelTimAve|Housekeeping Telemetry Time Averaging]] |
Telemetry & Level 0 Data Processing
- Level Zero refers to the lowest level of accessible data for a given instrument or spacecraft. Telemetry Checking, APID (Application ID) Lookup, Housekeeping telemetry processing and Image Reconstruction are performed at this level. The only processing done is typically the removal of duplicate data points (due to multiple file sends or a solid state recorder overlap), the removal or minimal repair of bad r/f data, the sorting of the different APIDs, and the matching of the end of one packet to the beginning of the next. The images taken by an instrument are left "as is" - not manipulated, not flat-fielded nor otherwise calibrated. All of the Level Zero data is recorded in the JSOC DRMS (database). In principle the level-0 data could be converted back to telemetry formatted data and is thus redundant with it but is in a more easily usable form using standard data storage protocols. JSOC image data is stored in compressed FITS files. JSOC metadata is stored in DRMS records but may be exported in several standard protocols (e.g. as part of exported FITS format images or tab delimited text tables).
Telemetry access information
- DDS Data Capture (aka High Speed Bus)
- Offsite Data Archive (raw data)
- MOC Data Product Server Data Retrieval
Accessing the server -- Information about accessing the MOC Product Server
Level 0 Processing
JSOC Level Zero Software Functional Specification.
http://hmi.stanford.edu/development/JSOC_Documents/Level-0-Documents/JSOC-LEVEL0-PROCESSING-FS.pdf- Level 0 Image Processing (HSB Telemetry)
-- Includes Time and Data Quality computations - Level 0 Housekeeping Telemetry Processing
-- "Merged" Housekeeping DRMS record creation
-- "Averaged" Housekeeping DRMS record creation - Housekeeping Configuration File Data Retrieval, Build, and Release to JSOC's TBL_JSOC Directory
JSOC Level Zero Functional Specification describes this functionality in section 3.6. The url link to JSOC Level 0 Functional Specification is shown above in first bullet. Information on running scripts to get housekeeping configuration data, building neccessary data files for Level 0 Processing and checking in files to JSOC CVS system are discussed in the Users Guide at the following link. Users Guide on HK Configuration Data Retrieval, Build, and Release - Production Data Archive (raw and level0)
- Data Accounting
JSOC will also include sub-levels (e.g. Level 0.3, Level 1.5) to indicate various stages of processing. For example, Level 0.3 will represent less processing (and perhaps less information) than Level 0.5.
- Orbit information
- Pointing information